5-Axis Milling
Simultaneous 5-axis on trunnion and gantry platforms for impellers, manifolds, and monolithic structural parts. One setup, five faces, zero tolerance stack-up.
ENVELOPE 800 × 650 × 500 mm · ±0.0002″ POSITIONAL
AS9100D · ISO 9001:2015 · ITAR REGISTERED
Machined to ±0.0002″.
Shipped in days,
not weeks.
Vulcan Precision CNC runs a lights-out shop floor of 5-axis mills, Swiss lathes, and wire EDM in Springville, Utah — turning your CAD into flight-ready aluminum, titanium, and PEEK components with full material traceability.
- TOL ±0.0002″
- AXES 5 simultaneous
- LEAD 3-day expedite
- QTY 1 – 50,000
SHOP FLOOR — LIVE
0
machines in cycle right now
0
parts shipped since 2019
0
on-time delivery, trailing 12 mo
0hrs
average quote turnaround
// CAPABILITIES
One PO. Every process
under one roof.
From billet to anodize, your part never leaves our quality system. No hand-offs, no finger-pointing, one certificate of conformance.
Swiss Turning
Sliding-headstock Swiss lathes with live tooling for bone screws, pins, and connector bodies down to ⌀0.020″. Bar-fed, lights-out, thousands per week.
⌀0.5 – 32 mm BAR · 12 LIVE TOOLS · LIGHTS-OUT
Wire & Sinker EDM
Four-axis wire EDM for hardened tool steel, carbide, and thin-wall geometry that cutters can't touch. Sinker EDM for blind cavities and sharp internal corners.
±0.0001″ PROFILE · Ra 8 µin FINISH · TAPER TO 30°
Anodize & Finishing
In-house Type II / Type III hardcoat anodize, passivation per AMS 2700, bead blast, and laser part marking. Cosmetic-grade color matching on customer masters.
MIL-A-8625 TYPE II/III · AMS 2700 · LASER MARK
CMM Inspection
Climate-controlled metrology lab with touch-probe and vision CMMs. Full FAI to AS9102, in-process SPC, and ballooned inspection reports with every lot.
AS9102 FAI · GD&T PER ASME Y14.5 · SPC ON REQUEST
Prototype to Production
Same programmers, same machines, from qty 1 DFM prototypes to 50,000-piece production runs. Fixtures and process plans carry over — so does your price break.
QTY 1 – 50,000 · KANBAN & BLANKET PO FRIENDLY
// MATERIALS & TOLERANCES
Spec sheet, not sales sheet.
Every alloy below is stocked with full mill certs and heat-lot traceability. If your callout isn't listed, our team will source it in 48 hours.
| Material | Common Grades | Std. Tolerance | Best Achievable | Surface Finish | Notes |
|---|---|---|---|---|---|
| Aluminum | 6061-T6, 7075-T651, MIC-6 | ±0.001″ | ±0.0002″ | Ra 16 µin | Anodize Type II/III in-house |
| Titanium | Ti-6Al-4V (Gr. 5), Gr. 2 CP | ±0.001″ | ±0.0003″ | Ra 16 µin | ELI available for implantables |
| Stainless | 303, 316L, 17-4 PH H900 | ±0.001″ | ±0.0002″ | Ra 8 µin | Passivation per AMS 2700 |
| Tool Steel | A2, D2, S7 (to 62 HRC) | ±0.0005″ | ±0.0001″ | Ra 8 µin | Wire EDM post-hardening |
| Copper Alloys | C110, C360 Brass, BeCu | ±0.001″ | ±0.0003″ | Ra 16 µin | RF & heat-sink applications |
| Engineering Plastics | PEEK, Delrin (POM), Ultem 1000 | ±0.002″ | ±0.0005″ | Ra 32 µin | Annealed for dimensional stability |
| Superalloys | Inconel 718, 625 | ±0.001″ | ±0.0005″ | Ra 16 µin | Ceramic tooling, rigid work-holding |
UNLESS OTHERWISE SPECIFIED: DIMENSIONS IN INCHES · GD&T PER ASME Y14.5-2018 · BREAK ALL EDGES .005 MAX
// INDUSTRIES SERVED
Trusted where failure isn't an option.
Aerospace
Actuator housings, avionics chassis, and wing-rib fittings machined to AS9100D with full AS9102 first-article packages.
Medical Device
Swiss-turned bone screws, surgical instrument bodies, and Ti-6Al-4V ELI implant components with lot-level traceability.
Defense
ITAR-registered facility with controlled data handling for optics mounts, guidance housings, and ruggedized enclosures.
Robotics
Harmonic-drive adapters, joint housings, and 7075 structural frames — light, stiff, and repeatable across thousand-unit runs.
// QUALITY SYSTEM
Certified. Audited. Traceable to the heat lot.
Quality isn't a department at Vulcan — it's the operating system. Every job travels with a digital router; every dimension has a named inspector; every raw bar traces back to a mill cert. Our last customer audit closed with zero findings.
- AS9102 first-article inspection on every new revision
- Calibrated gage program, NIST-traceable
- In-process SPC with Cpk reporting on request
- Controlled ITAR data environment — no offshore transmission, ever
Quality management certified since 2016
Aerospace quality system, third-party audited
DDTC registered, controlled data workflows
// INSTANT QUOTE
From CAD file to loading dock in three steps.
Watch how a quote moves through our system — or click a step to jump ahead.
Drag in a STEP, IGES, or native SolidWorks file
Your geometry is encrypted in transit and at rest, visible only to our estimating engineers — never third parties. Attach your drawing PDF for GD&T and critical dimensions, pick quantity and material, done.
A machinist — not an algorithm — checks your design
Within one business day, a senior programmer flags thin walls, unreachable corners, and tolerance callouts that quietly double cost. You get a marked-up model and a firm price, often with a cheaper alternative noted.
Accept online — parts ship in as few as 3 days
Approval drops your job straight into the schedule. Track machining, inspection, and finishing live from your dashboard, then receive parts with a C of C, material certs, and a ballooned inspection report in the box.
Start Your Quote
No account needed. First-order DFM review is always free.
We moved a 7075 actuator housing to Vulcan after two other shops blew the true-position callout. First article passed CMM on every datum, the AS9102 package was flawless, and they've hit 100% on-time across eleven releases since. They're on our approved supplier list permanently.
// READY WHEN YOU ARE
Get a firm quote in 24 hours.
Send us the part the other shops no-quoted. If it fits our envelope, we'll price it — with DFM notes included, free.